Idea
In short
How do you build a magnetic bead abacus?
Small magnets on sliding beads pass over reed switches on a wooden rod, and the display adds up the beads moved across. A tactile way to learn counting and place value with a screen that checks your answer. Keep the small magnets away from small children, phones, cards and anyone with a pacemaker. You need Arduino Nano, Reed switch (glass, 2 × 14 mm) × 5, Neodymium magnets (10 × 3 mm) × 3, TM1637 4-digit display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 100 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count with beads and see the total.
Parts list
- Development Boards
- Switches
- Mechanical & Hardware
- Displays
- Prototyping
- Prototyping
How to build it
- Fix reed switches along a short rod
- Fit a small magnet in each bead
- Read which switches are closed
- Add up the value of the beads moved across
- Show the total on the display
Common questions
What parts do I need for the magnetic bead abacus?
Arduino Nano, Reed switch (glass, 2 × 14 mm) × 5, Neodymium magnets (10 × 3 mm) × 3, TM1637 4-digit display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the magnetic bead abacus take to build?
About 100 minutes for a intermediate maker.
