Idea
In short
How do you build a community LoRaWAN gateway?
An 8-channel gateway on a rooftop gives the whole neighbourhood free LoRaWAN coverage. You need LoRaWAN gateway (RAK7268 / 8-channel), 868 MHz LoRa antenna, Coaxial cable RG58 and Ethernet cable Cat6 (3 m).
- Level
- Advanced
- Time
- About 300 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Install and run a network gateway.
Parts list
- Wireless
- WirelessUse an outdoor 868 MHz antenna
- Cables & Wires
- Cables & Wires
How to build it
- Register the gateway on The Things Network
- Mount the antenna high with a short cable
- Connect over Ethernet
- Check coverage with a mapping node
- Add lightning protection
Common questions
What parts do I need for the community LoRaWAN gateway?
LoRaWAN gateway (RAK7268 / 8-channel), 868 MHz LoRa antenna, Coaxial cable RG58 and Ethernet cable Cat6 (3 m). 868 MHz LoRa antenna: Use an outdoor 868 MHz antenna.
How long does the community LoRaWAN gateway take to build?
About 300 minutes for a advanced maker.
