Idea
In short
How do you build a loRaWAN sensor on The Things Network?
A LoRaWAN node sends temperature to The Things Network every 10 minutes and you see it on a web console. You need RAK3172 LoRaWAN module, BME280 Environmental Sensor, Battery holder 4 × AA with switch, AA alkaline battery × 4 and 868 MHz LoRa antenna.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Join a LoRaWAN network and send compact payloads.
Parts list
- Wireless
- Sensors
- Power
- Batteries
- Wireless
How to build it
- Register the device and get its keys
- Join with OTAA
- Pack readings into a few bytes
- Write a payload decoder on the console
- Respect the fair-use airtime limits
Common questions
What parts do I need for the loRaWAN sensor on The Things Network?
RAK3172 LoRaWAN module, BME280 Environmental Sensor, Battery holder 4 × AA with switch, AA alkaline battery × 4 and 868 MHz LoRa antenna.
How long does the loRaWAN sensor on The Things Network take to build?
About 240 minutes for a intermediate maker.
