Projects / Ideas / Lead-acid battery health checker

Lead-acid battery health checker

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a lead-acid battery health checker?

Measure an inverter or bike battery's resting voltage and voltage drop under a known load to estimate its state of charge and health. You need Arduino Nano, Voltage sensor module (0 to 25 V), Relay 30 A 12 V (automotive), Relay Module 5V, Power resistor 10 Ω 5 W (cement) × 2 and 16x2 LCD with I2C backpack (PCF8574).

Level
Intermediate
Time
About 120 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use resting voltage tables and load tests to judge a lead-acid battery.

How to build it

  1. Measure resting voltage after the battery sits 4 hours
  2. Look up state of charge (12.7 V full, 12.2 V half)
  3. Apply a load for 10 s and measure the drop
  4. A large drop means high internal resistance
  5. Never short the battery

Related projects

Common questions

What parts do I need for the lead-acid battery health checker?

Arduino Nano, Voltage sensor module (0 to 25 V), Relay 30 A 12 V (automotive), Relay Module 5V, Power resistor 10 Ω 5 W (cement) × 2 and 16x2 LCD with I2C backpack (PCF8574).

How long does the lead-acid battery health checker take to build?

About 120 minutes for a intermediate maker.