Idea
In short
How do you build a laser maze game?
Laser beams bounce around a room on mirrors and players must cross without breaking one. You need Arduino Nano, Laser diode module 5 V (red, 650 nm) × 3, LDR Photoresistor × 3, Resistor 10 kΩ × 3, Active buzzer 5 V and TM1637 4-digit display.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect beam breaks and time a game.
Parts list
- Development Boards
- Optoelectronics
- Sensors
- PassivesResistor 10 kΩ × 3
- Motors & Actuators
- Displays
How to build it
- Align each laser on an LDR
- Calibrate light levels
- Start a timer
- Buzz and add penalty seconds when a beam breaks
- Use a fog machine to see beams, and never aim at eyes
Related projects
Common questions
What parts do I need for the laser maze game?
Arduino Nano, Laser diode module 5 V (red, 650 nm) × 3, LDR Photoresistor × 3, Resistor 10 kΩ × 3, Active buzzer 5 V and TM1637 4-digit display.
How long does the laser maze game take to build?
About 180 minutes for a intermediate maker.
