Projects / Ideas / Small fan and pump test bench

Small fan and pump test bench

BeginnerHome LabIdeaReviewed
In short

How do you build a small fan and pump test bench?

A tiny motor driver runs a small fan or pump at set speeds so you can compare noise and flow. You need Arduino Nano, L9110S dual motor driver, 5 V DC fan 40 mm, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive small DC loads.

Parts list

How to build it

  1. Wire the driver
  2. Spin the fan forward
  3. Set speed with the knob
  4. Change direction
  5. Note the current draw

Related projects

Common questions

What parts do I need for the small fan and pump test bench?

Arduino Nano, L9110S dual motor driver, 5 V DC fan 40 mm, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

How long does the small fan and pump test bench take to build?

About 150 minutes for a beginner maker.