Projects / Ideas / Neat battery leads with JST connectors

Neat battery leads with JST connectors

BeginnerLearningIdeaReviewed
In short

How do you build a neat battery leads with JST connectors?

Crimp and solder JST leads for batteries and sensors so everything unplugs cleanly. Mark polarity and use heat shrink. You need JST XH 2.54 mm connector kit, Crimping tool (Dupont / JST), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.

Level
Beginner
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make safe plug-in leads.

How to build it

  1. Cut and strip wire
  2. Crimp the contacts
  3. Fit the housing
  4. Check polarity with a meter
  5. Label the lead

Related projects

Common questions

What parts do I need for the neat battery leads with JST connectors?

JST XH 2.54 mm connector kit, Crimping tool (Dupont / JST), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.

How long does the neat battery leads with JST connectors take to build?

About 120 minutes for a beginner maker.