Idea
In short
How do you build a real-time clock backup test?
A clock chip keeps time while the board is off. You test how long the backup cell holds it and log the drift. You need Arduino Nano, DS1307 RTC IC, Crystal 32.768 kHz (watch crystal), 18650 cell 2600 mAh (branded), Battery holder 18650 single, Resistor 4.7 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 210 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See how an RTC keeps time.
Parts list
- Development Boards
- Integrated Circuits
- Passives
- Batteries
- Power
- PassivesResistor 4.7 kΩ × 2
- Displays
- Prototyping
How to build it
- Wire the chip with the crystal and cell
- Set the time
- Unplug the board
- Re-read after a day
- Note the drift in seconds
Common questions
What parts do I need for the real-time clock backup test?
Arduino Nano, DS1307 RTC IC, Crystal 32.768 kHz (watch crystal), 18650 cell 2600 mAh (branded), Battery holder 18650 single, Resistor 4.7 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the real-time clock backup test take to build?
About 210 minutes for a beginner maker.
