Idea
In short
How do you build a sequential light with CD4017 and 555?
A 555 clock steps a decade counter to run ten LEDs in sequence without a microcontroller. You need NE555 Timer IC, CD4017 Counter, LED 5 mm red × 5, LED 5 mm green × 5, Resistor 330 Ω × 10, Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a clocked sequencer.
Parts list
- Integrated Circuits
- Integrated Circuits
- SemiconductorsLED 5 mm red × 5
- SemiconductorsLED 5 mm green × 5
- PassivesResistor 330 Ω × 10
- Passives
- Passives
- Passives
- Prototyping
How to build it
- Build a 555 clock
- Feed the counter
- Light ten LEDs
- Change speed with a pot
- Reset after the fifth LED
Common questions
What parts do I need for the sequential light with CD4017 and 555?
NE555 Timer IC, CD4017 Counter, LED 5 mm red × 5, LED 5 mm green × 5, Resistor 330 Ω × 10, Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF and Breadboard 830 Tie Points.
How long does the sequential light with CD4017 and 555 take to build?
About 150 minutes for a beginner maker.
