Idea
In short
How do you build a jetson input size trade-off lab?
Run a detector at three input image sizes and measure the speed in frames a second and the number of correct detections at each size. See how a smaller picture runs faster and misses small objects, and pick the best size for your job. You need NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin and NVMe SSD 256 GB (M.2 2230/2242).
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Trade speed against accuracy by image size.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
How to build it
- Choose three input sizes
- Time each over one hundred frames
- Count correct detections on a test set
- Plot speed against accuracy
- Pick the best size for a small and a large target
Common questions
What parts do I need for the jetson input size trade-off lab?
NVIDIA Jetson Orin Nano Super Developer Kit, IMX219 camera for Jetson Nano and Orin and NVMe SSD 256 GB (M.2 2230/2242).
How long does the jetson input size trade-off lab take to build?
About 90 minutes for a intermediate maker.
