Idea
In short
How do you build a jetson boot and storage speed lab?
Move a Jetson Orin Nano from the memory card to an NVMe drive and time the boot, the file copy and the model load on each. You see why fast storage matters for AI work and how to set the board to boot from the drive. You need NVIDIA Jetson Orin Nano Super Developer Kit and NVMe SSD 256 GB (M.2 2230/2242).
- Level
- Beginner
- Time
- About 120 min
- Parts
- 2
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Time the Jetson from card and from NVMe.
Parts list
- Single Board Computers
- SBC Accessories
How to build it
- Boot from the card and time it
- Fit the NVMe drive
- Clone the system and set the boot order
- Time boot, copy and model load on both
- Write a table and a recommendation
Common questions
What parts do I need for the jetson boot and storage speed lab?
NVIDIA Jetson Orin Nano Super Developer Kit and NVMe SSD 256 GB (M.2 2230/2242).
How long does the jetson boot and storage speed lab take to build?
About 120 minutes for a beginner maker.
