Idea
In short
How do you build a twelve-volt LED strip dimmer?
A MOSFET module and PWM dim a short length of warm white 12 V strip from a knob, with a note on current and heat. You need Arduino Nano, IRF520 MOSFET driver module, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Potentiometer 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Dim a 12 V strip.
Parts list
- Development Boards
- Motor Drivers
- Optoelectronics
- Power
- Passives
- Prototyping
How to build it
- Cut a short length of strip
- Wire the module
- Read the knob
- Set the PWM
- Measure the strip current
Common questions
What parts do I need for the twelve-volt LED strip dimmer?
Arduino Nano, IRF520 MOSFET driver module, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Potentiometer 10 kΩ and Breadboard 830 Tie Points.
How long does the twelve-volt LED strip dimmer take to build?
About 150 minutes for a intermediate maker.
