Idea
In short
How do you build an MOSFET module strip dimmer?
A ready-made MOSFET switch module lets a knob dim a low-voltage LED strip smoothly with PWM. You need Arduino Nano, MOSFET switch module (D4184 / AOD4184), 12 V LED strip warm white (5 m, 2835), Potentiometer 10 kΩ and 12 V 2 A DC adapter.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Dim a strip with a switch module.
Parts list
- Development Boards
- Interfaces
- Optoelectronics
- Passives
- Power
How to build it
- Check the module markings
- Wire the control pin
- Wire the strip and supply
- Map the knob to PWM
- Check the module stays cool
Common questions
What parts do I need for the MOSFET module strip dimmer?
Arduino Nano, MOSFET switch module (D4184 / AOD4184), 12 V LED strip warm white (5 m, 2835), Potentiometer 10 kΩ and 12 V 2 A DC adapter.
How long does the MOSFET module strip dimmer take to build?
About 120 minutes for a beginner maker.
