IRF520 MOSFET driver module
MOSFET board for switching a motor or LED strip from a pin.
FunctionLow-side MOSFET switch
Supply voltageUp to 24 V load
RatingRealistically about 1 A from a 5 V pin
Watch out forIRF520 is not logic-level: it barely turns on at 5 V and not at 3.3 V; use an IRLZ44N or AO3400 instead
Motor DriversReviewedMPN IRF520 moduleUsed in 2 projects
In short
What is the IRF520 MOSFET driver module and what is it used for?
MOSFET board for switching a motor or LED strip from a pin. Makers use it for fans and LED strips (low current).
How it works
A low-side N-channel MOSFET switch with an LED indicator.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Low-side MOSFET switch |
| Supply voltage | Up to 24 V load |
| Rating | Realistically about 1 A from a 5 V pin |
| Watch out for | IRF520 is not logic-level: it barely turns on at 5 V and not at 3.3 V; use an IRLZ44N or AO3400 instead |
Pinout
SIGGate input
VCCNot used on most boards
GNDGround
VIN GNDLoad supply in
V+ V-Load out
How to use it
The IRF520 is not a logic-level MOSFET, so a 5 V pin turns it only partly on and it heats up above about 1 A. From 3.3 V boards it barely works. Use the D4184 module or an IRLZ44N for real loads.
Applications
Fans and LED strips (low current)
Builds that use it
Alternatives
- MOSFET switch module (D4184 / AOD4184)Logic-level, far more current
- MOSFET IRLZ44NLogic-level MOSFET to build your own
Common questions
What is the IRF520 MOSFET driver module used for?
In maker projects: fans and LED strips (low current).
How does the IRF520 MOSFET driver module work?
A low-side N-channel MOSFET switch with an LED indicator.
What voltage does the IRF520 MOSFET driver module need?
Up to 24 V load.
What can I use instead of the IRF520 MOSFET driver module?
MOSFET switch module (D4184 / AOD4184) and MOSFET IRLZ44N.
