Idea
In short
How do you build a universal IR remote recorder?
Record the codes of a TV remote and replay them with an IR LED, as a learning exercise in protocols. You need Arduino Uno R3, IR receiver VS1838B, IR LED 940 nm (5 mm), Resistor 220 Ω, NPN Transistor 2N2222, Resistor 1 kΩ, Tactile push button 6 mm × 3 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn IR protocols.
Parts list
- Development Boards
- Sensors
- Optoelectronics
- Passives
- Semiconductors
- Passives
- Switches
- Prototyping
How to build it
- Capture a few button codes
- Print their protocol
- Store them
- Replay with the IR LED
- Use only your own devices
Common questions
What parts do I need for the universal IR remote recorder?
Arduino Uno R3, IR receiver VS1838B, IR LED 940 nm (5 mm), Resistor 220 Ω, NPN Transistor 2N2222, Resistor 1 kΩ, Tactile push button 6 mm × 3 and Breadboard 830 Tie Points.
How long does the universal IR remote recorder take to build?
About 210 minutes for a intermediate maker.
