Idea
In short
How do you build a greenhouse vent opener?
A servo opens a small greenhouse window when the temperature rises and closes it when it cools. You need Arduino Nano, SHT31 temperature and humidity sensor, MG996R metal gear servo, Li-ion 18650 pack 3S 2P (11.1 V), Mini-360 buck converter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a vent with hysteresis.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Batteries
- Power
- Prototyping
How to build it
- Read temperature
- Set open and close thresholds
- Move the servo slowly
- Add a manual override
- Power the servo from a separate buck output
Common questions
What parts do I need for the greenhouse vent opener?
Arduino Nano, SHT31 temperature and humidity sensor, MG996R metal gear servo, Li-ion 18650 pack 3S 2P (11.1 V), Mini-360 buck converter and Breadboard 830 Tie Points.
How long does the greenhouse vent opener take to build?
About 240 minutes for a intermediate maker.
