Projects / Ideas / Stress level wristband

Stress level wristband

IntermediateWearablesIdeaReviewed
In short

How do you build a stress level wristband?

A skin conductance sensor shows stress changes during the day as a colour on a small LED. You need Seeed XIAO ESP32C3, Galvanic skin response sensor, WS2812B single LED module (8 mm / breakout) and Li-Po battery 3.7 V 500 mAh.

Level
Intermediate
Time
About 150 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure a small biosignal and track trends.

How to build it

  1. Wear the finger electrodes
  2. Read the slow conductance level
  3. Find your baseline
  4. Show rises as a warmer colour
  5. Log events to see patterns

Related projects

Common questions

What parts do I need for the stress level wristband?

Seeed XIAO ESP32C3, Galvanic skin response sensor, WS2812B single LED module (8 mm / breakout) and Li-Po battery 3.7 V 500 mAh.

How long does the stress level wristband take to build?

About 150 minutes for a intermediate maker.