Idea
In short
How do you build an ESP32 alarm clock set from a web page?
An ESP32 keeps time with a DS3231 and sounds a passive buzzer at an alarm time that you set on a small web page on your own network. Never rely on it as the only alarm. You need ESP32 DevKit V1, DS3231 RTC module, Passive buzzer, Resistor 330 Ω and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 170 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Set an alarm from a phone browser.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Passives
- Prototyping
How to build it
- Read the clock chip over I2C
- Serve a page with a time field
- Store the alarm in memory
- Compare once a second
- Beep in a pattern and stop on a touch or button
Common questions
What parts do I need for the ESP32 alarm clock set from a web page?
ESP32 DevKit V1, DS3231 RTC module, Passive buzzer, Resistor 330 Ω and Breadboard 830 Tie Points.
How long does the ESP32 alarm clock set from a web page take to build?
About 170 minutes for a intermediate maker.
