Idea
In short
How do you build a pico W reed-switch door status page?
A Pico W watches a reed switch on a door and serves open or closed on a local web page, with a count of openings today. Tell household members about it; it is a hobby alert, not a certified alarm. You need Raspberry Pi Pico W, Door reed switch MC-38, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 110 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Check from a phone whether a door is open.
Parts list
- Development Boards
- Sensors
- Passives
- Prototyping
How to build it
- Wire the reed switch with a pull-up
- Read the open and closed state
- Join Wi-Fi with placeholder credentials
- Serve a status page
- Count openings
Common questions
What parts do I need for the pico W reed-switch door status page?
Raspberry Pi Pico W, Door reed switch MC-38, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the pico W reed-switch door status page take to build?
About 110 minutes for a beginner maker.
