Idea
In short
How do you build a moth light trap controller?
A UV light turns on at dusk and off at dawn and counts photos taken inside the trap. You need ESP32 DevKit V1, UV LED 395 nm (5 mm) × 6, BH1750 light sensor, MOSFET IRLZ44N and 12 V 2 A DC adapter.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Automate a survey trap.
Parts list
- Development Boards
- Optoelectronics
- Sensors
- Semiconductors
- Power
How to build it
- Switch on at dusk
- Off at dawn
- Log hours
- Add a camera
- Release moths after counting
Common questions
What parts do I need for the moth light trap controller?
ESP32 DevKit V1, UV LED 395 nm (5 mm) × 6, BH1750 light sensor, MOSFET IRLZ44N and 12 V 2 A DC adapter.
How long does the moth light trap controller take to build?
About 120 minutes for a beginner maker.
