Idea
In short
How do you build a dollhouse lighting panel?
A Nano drives eight room lights of a dollhouse through a 74HC595 shift register, with four buttons to switch groups of rooms. Each LED has its own resistor and the board runs from USB. You need Arduino Nano, 74HC595 shift register module (8 outputs), LED 5 mm yellow × 4, LED 5 mm white × 4, Resistor 220 Ω × 8, Tactile push button 6 mm × 4 and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 140 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Light the rooms of a dollhouse from one panel.
Parts list
- Development Boards
- Interfaces
- SemiconductorsLED 5 mm yellow × 4
- OptoelectronicsLED 5 mm white × 4
- PassivesResistor 220 Ω × 8
- Switches
- Prototyping
How to build it
- Wire the shift register module
- Add the LEDs with resistors
- Send the bits to the register
- Read the four buttons
- Toggle the room groups
Common questions
What parts do I need for the dollhouse lighting panel?
Arduino Nano, 74HC595 shift register module (8 outputs), LED 5 mm yellow × 4, LED 5 mm white × 4, Resistor 220 Ω × 8, Tactile push button 6 mm × 4 and Breadboard 830 Tie Points.
How long does the dollhouse lighting panel take to build?
About 140 minutes for a beginner maker.
