Idea
In short
How do you build a barrel to bed transfer pump?
A 12 V pump moves water from a rain barrel to a watering can, with a float switch to stop it dry running. You need Arduino Nano, 12 V DC water pump (diaphragm), Float switch (vertical), MOSFET IRLZ44N, Rectifier Diode 1N4007, 12 V 2 A DC adapter, Fuse 5 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Protect a pump from running dry.
Parts list
- Development Boards
- Motors & Actuators
- Sensors
- Semiconductors
- Semiconductors
- Power
- Passives
- Prototyping
How to build it
- Wire the pump through a MOSFET
- Add the flyback diode
- Stop when the float says empty
- Add a start button
- Add a time limit
Common questions
What parts do I need for the barrel to bed transfer pump?
Arduino Nano, 12 V DC water pump (diaphragm), Float switch (vertical), MOSFET IRLZ44N, Rectifier Diode 1N4007, 12 V 2 A DC adapter, Fuse 5 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
How long does the barrel to bed transfer pump take to build?
About 270 minutes for a intermediate maker.
