How do you build a line-following delivery robot with stations?
A robot follows lines between numbered stations marked with RFID tags and delivers a box to the station chosen on a keypad. You need Arduino Mega 2560 R3, TCRT5000 IR reflective sensor module × 5, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 5, 4x4 matrix keypad (membrane), L298N Dual H-Bridge Module, Robot car chassis kit 4WD, Battery holder 18650 2S (series) and 18650 cell 2600 mAh (branded) × 2.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 9
Combine line following with location tags and a destination.
Parts list
- Development Boards
- Sensors
- Wireless
- Wireless
- Switches
- Motor Drivers
- Mechanical & Hardware
- Power
- Batteries
How to build it
- Place RFID tags under the line at each station
- Choose a destination on the keypad
- Follow the line and read tags as you pass
- Stop at the chosen station and wait for a button press
- Return to base
Common questions
What parts do I need for the line-following delivery robot with stations?
Arduino Mega 2560 R3, TCRT5000 IR reflective sensor module × 5, RC522 RFID reader, RFID tags 13.56 MHz (MIFARE Classic 1K) × 5, 4x4 matrix keypad (membrane), L298N Dual H-Bridge Module, Robot car chassis kit 4WD, Battery holder 18650 2S (series) and 18650 cell 2600 mAh (branded) × 2.
How long does the line-following delivery robot with stations take to build?
About 360 minutes for a advanced maker.
