Idea
In short
How do you build a paper circuit card?
A greeting card with a coin cell, a paper switch and two LEDs that light when the card is opened or a tab is pressed. Use the right polarity, never try to charge a coin cell, and keep spare cells away from small children, as coin cells are dangerous if swallowed. You need CR2032 coin cell, CR2032 coin cell holder, LED 5 mm red × 2, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 50 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Light an LED inside a paper card.
Parts list
- Batteries
- Power
- SemiconductorsLED 5 mm red × 2
- PassivesResistor 220 Ω × 2
- Prototyping
How to build it
- Draw the circuit on the card
- Place the holder and the LEDs the right way round
- Make a paper switch from a folded tab
- Test it
- Decorate the card and hide the parts
Common questions
What parts do I need for the paper circuit card?
CR2032 coin cell, CR2032 coin cell holder, LED 5 mm red × 2, Resistor 220 Ω × 2 and Breadboard 830 Tie Points.
How long does the paper circuit card take to build?
About 50 minutes for a beginner maker.
