Projects / Ideas / Hum-breaker box

Hum-breaker box

BeginnerAudio & MusicIdeaReviewed
In short

How do you build a hum-breaker box?

A small isolation transformer between two audio jacks removes ground-loop hum between a computer and an amplifier. You need Audio transformer 1:1 (600 Ω), Audio jack 3.5 mm (PCB, stereo) × 2, Resistor 10 kΩ × 2 and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Break a ground loop.

How to build it

  1. Wire the transformer between the jacks
  2. Add the load resistors
  3. Test with and without
  4. Listen for hum
  5. Fit it in a small box

Related projects

Common questions

What parts do I need for the hum-breaker box?

Audio transformer 1:1 (600 Ω), Audio jack 3.5 mm (PCB, stereo) × 2, Resistor 10 kΩ × 2 and Breadboard 830 Tie Points.

How long does the hum-breaker box take to build?

About 150 minutes for a beginner maker.