Projects / Ideas / Two accelerometers on a tilt table

Two accelerometers on a tilt table

IntermediateMotionIdeaReviewed
In short

How do you build a two accelerometers on a tilt table?

Read two accelerometer chips on the same board tilted in steps with a protractor and see how well each follows the angle. You need Arduino Nano, ADXL345 IC, MMA8452Q accelerometer, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare accelerometer chips.

Parts list

How to build it

  1. Wire both chips on I2C
  2. Read the three axes
  3. Tilt in ten degree steps
  4. Work out the angle from each
  5. Plot the error

Related projects

Common questions

What parts do I need for the two accelerometers on a tilt table?

Arduino Nano, ADXL345 IC, MMA8452Q accelerometer, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the two accelerometers on a tilt table take to build?

About 180 minutes for a intermediate maker.