MMA8452Q accelerometer
3-axis 12-bit accelerometer.
MeasuresAcceleration
Range±2 to ±8 g
InterfaceI2C
I2C address0x1C or 0x1D
SensorsReviewedMPN MMA8452QUsed in 2 projects
In short
What is the MMA8452Q accelerometer and what is it used for?
3-axis 12-bit accelerometer. Makers use it for tilt and motion.
How it works
A MEMS accelerometer with built-in orientation and tap detection.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Acceleration |
| Range | ±2 to ±8 g |
| Interface | I2C |
| I2C address | 0x1C or 0x1D |
| Supply voltage | 1.95 to 3.6 V |
Pinout
3.3VSupply
GNDGround
SCLI2C clock
SDAI2C data
I1 and I2Interrupts
SA0Address select
How to use it
Use the SparkFun MMA8452Q library. It runs at 3.3 V only.
Applications
Tilt and motion
Builds that use it
Alternatives
- LIS3DH accelerometerMore common now
Common questions
What is the MMA8452Q accelerometer used for?
In maker projects: tilt and motion.
How does the MMA8452Q accelerometer work?
A MEMS accelerometer with built-in orientation and tap detection.
What voltage does the MMA8452Q accelerometer need?
1.95 to 3.6 V.
How do I connect the MMA8452Q accelerometer to an Arduino or ESP32?
I2C. Pins: 3.3V (Supply), GND (Ground), SCL (I2C clock), SDA (I2C data), I1 and I2 (Interrupts), SA0 (Address select).
What can I use instead of the MMA8452Q accelerometer?
LIS3DH accelerometer.
