Lab / Virtual lab / Transients
RC charging
Measure the capacitor voltage while it charges and find the time constant.
Circuit
Updates as you change valuesA 5 V step applied to a resistor and capacitor in series; the voltmeter reads across the capacitor.
Controls
Changing any setting except time after switch-on starts a new set of readings.
Meters
Capacitor voltage3.16 V
Charging current0.184 mA
Graph
0 readingsYour graph appears here
Take readings, or press Auto sweep to log a full set.
your readings
Theory
- vC(t) = V (1 − e^(−t/τ)), τ = R C
- At t = τ, vC = 63.2 % of V; at 5τ, 99.3 % (taken as fully charged)
- iC(t) = (V/R) e^(−t/τ)
- Energy stored W = ½ C V²; the resistor burns the same amount while charging
Worked out for your values
- Time constant τ
- 1 s
- Fully charged at 5τ
- 5 s
- vC now
- 3.161 V
- Current now
- 183.9 µA
- Energy when full
- 1.25 mJ
Your result
Worked out from your readings and compared with theory.
τ from the 63.2 % point
Take readings either side of 3.16 V.
τ from the slope of ln(1 − vC/V)
Take three or more readings before full charge.
Sources of error
- Electrolytic capacitor tolerance is wide (often ±20 %)
- Capacitor leakage current lowers the final voltage
- Reaction time when reading a stopwatch
- Meter input resistance discharges the capacitor slightly
More in Transients
