RC low-pass and high-pass filters
To plot the frequency response of first-order RC low-pass and high-pass filters and find the cut-off frequency.
Theory
An RC low-pass filter passes low frequencies: gain = 1/√(1 + (f/fc)²). A high-pass filter does the opposite: gain = (f/fc)/√(1 + (f/fc)²). At the cut-off frequency fc = 1/(2πRC) the gain is 0.707 (−3 dB), and beyond it the response falls by 20 dB per decade.
Apparatus
- Function generator
- Resistor 1 kΩ
- Capacitor 0.1 µF
- CRO
Circuit connections
- Low-pass: input → R → output node, C from output to ground
- High-pass: input → C → output node, R from output to ground
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| f (Hz) | Vo / Vi | Gain (dB) |
|---|---|---|
| 32 | 1 | 0 |
| 85 | 0.999 | 0 |
| 225 | 0.99 | -0.1 |
| 599 | 0.936 | -0.6 |
| 1592 | 0.707 | -3 |
| 4232 | 0.352 | -9.1 |
| 11254 | 0.14 | -17.1 |
| 29926 | 0.053 | -25.5 |
| 79577 | 0.02 | -34 |
Precautions
- Keep the input amplitude constant.
- Use a log scale for frequency.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | f (Hz) | Vo / Vi | Gain (dB) |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Your lab record
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva practice
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the rc low-pass and high-pass filters experiment?
To plot the frequency response of first-order RC low-pass and high-pass filters and find the cut-off frequency.
What apparatus is needed for rc low-pass and high-pass filters?
Function generator, Resistor 1 kΩ, Capacitor 0.1 µF, CRO.
What is the theory behind rc low-pass and high-pass filters?
An RC low-pass filter passes low frequencies: gain = 1/√(1 + (f/fc)²). A high-pass filter does the opposite: gain = (f/fc)/√(1 + (f/fc)²). At the cut-off frequency fc = 1/(2πRC) the gain is 0.707 (−3 dB), and beyond it the response falls by 20 dB per decade.
What result should I get in rc low-pass and high-pass filters?
The cut-off frequency is ___ Hz (theory ___ Hz); the gain falls at about 20 dB/decade beyond it.
What precautions should I take in rc low-pass and high-pass filters?
Keep the input amplitude constant. Use a log scale for frequency.
