Lab / Analog and linear ICs

Hartley and Colpitts (LC) oscillators

To build Colpitts and Hartley oscillators and compare the measured frequency with theory.

Analog and linear ICsVirtual readings4 viva questions
Av ≈ 48

Theory

Both use an LC tank. Colpitts uses a split capacitor: f = 1 / (2π√(L·Ceq)), Ceq = C1C2/(C1 + C2), with feedback set by C1/C2. Hartley uses a split (tapped) inductor: f = 1 / (2π√((L1 + L2)C)), ignoring mutual inductance.

Apparatus

  • Transistor BC547 or IC 741
  • Inductors
  • Capacitors
  • Resistors for biasing
  • DC supply
  • CRO

Circuit connections

  • Colpitts: tank of L with C1 and C2 in series, their joint to ground; feedback from the tank to the amplifier input
  • Hartley: tank of L1 and L2 in series with C across both

Procedure

Pre-lab check

4 questions · 75% to be ready
1Difference between Hartley and Colpitts?
2Why are LC oscillators used at RF?
3What is a tank circuit?
4Which oscillator is most stable?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
CircuitFrequency
Colpitts52.79 kHz
Hartley15.92 kHz

Precautions

  • Keep leads short; stray capacitance changes the frequency.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.CircuitFrequency
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book

Your lab record

Result formatColpitts: theory ___ kHz, measured ___ kHz. Hartley: theory ___ kHz, measured ___ kHz.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva practice

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. Difference between Hartley and Colpitts?
2. Why are LC oscillators used at RF?
3. What is a tank circuit?
4. Which oscillator is most stable?

Quick answers for your record and viva

What is the aim of the hartley and colpitts (lc) oscillators experiment?

To build Colpitts and Hartley oscillators and compare the measured frequency with theory.

What apparatus is needed for hartley and colpitts (lc) oscillators?

Transistor BC547 or IC 741, Inductors, Capacitors, Resistors for biasing, DC supply, CRO.

What is the theory behind hartley and colpitts (lc) oscillators?

Both use an LC tank. Colpitts uses a split capacitor: f = 1 / (2π√(L·Ceq)), Ceq = C1C2/(C1 + C2), with feedback set by C1/C2. Hartley uses a split (tapped) inductor: f = 1 / (2π√((L1 + L2)C)), ignoring mutual inductance.

What result should I get in hartley and colpitts (lc) oscillators?

Colpitts: theory ___ kHz, measured ___ kHz. Hartley: theory ___ kHz, measured ___ kHz.

What precautions should I take in hartley and colpitts (lc) oscillators?

Keep leads short; stray capacitance changes the frequency.

Hartley and Colpitts (LC) oscillators: lab experiment