Lab / VTU / Electronic devices / Experiment 7

JFET drain and transfer characteristics

Electronic devicesVirtual readings4 viva questionsRecord book ready
Open virtual bench
Aim

To plot the drain and transfer characteristics of an N-channel JFET and find IDSS, pinch-off voltage and transconductance.

Apparatus
  • JFET BFW10 (or 2N5457)
  • Two DC supplies
  • Voltmeters
  • Milliammeter
Av ≈ 48

Theory

A JFET is a voltage-controlled device. With VGS = 0 the drain current saturates at IDSS above the pinch-off voltage. Making the gate more negative narrows the channel: ID = IDSS (1 − VGS/VP)². Transconductance gm = ΔID/ΔVGS, and the drain resistance rd = ΔVDS/ΔID.

Read the lesson: Mosfet switching ›
Circuit connections
  • VDD → mA meter → drain; source to ground; VGG (negative) → gate; voltmeters across gate-source and drain-source

Procedure

Pre-lab check

4 questions · 75% to be ready
1Why is a JFET called voltage-controlled?
2What is pinch-off?
3Why is the JFET's input resistance high?
4Compare JFET and BJT.

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
gm0 = 2·IDSS / |VP|4 mS
02.274.546.89.0702.557.510VDS (V)ID (mA)
ID at VGS 0 V (mA)ID at VGS −1 V (mA)ID at VGS −2 V (mA)
VDS (V)ID at VGS 0 V (mA)ID at VGS −1 V (mA)ID at VGS −2 V (mA)
0000
0.51.8751.3750.875
13.52.51.5
2642.02
37.54.5682.03
48.164.592.04
68.244.6352.06
88.324.682.08
108.44.7252.1

Precautions

  • Never forward-bias the gate-source junction.
  • Handle the FET by its body, not its leads.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.VDS (V)ID at VGS 0 V (mA)ID at VGS −1 V (mA)ID at VGS −2 V (mA)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

IDSS = ___ mA, VP = ___ V, gm = ___ mS, rd = ___ kΩ.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. Why is a JFET called voltage-controlled?
2. What is pinch-off?
3. Why is the JFET's input resistance high?
4. Compare JFET and BJT.

Quick answers for your record and viva

What is the aim of the jfet drain and transfer characteristics experiment?

To plot the drain and transfer characteristics of an N-channel JFET and find IDSS, pinch-off voltage and transconductance.

What apparatus is needed for jfet drain and transfer characteristics?

JFET BFW10 (or 2N5457), Two DC supplies, Voltmeters, Milliammeter.

What is the theory behind jfet drain and transfer characteristics?

A JFET is a voltage-controlled device. With VGS = 0 the drain current saturates at IDSS above the pinch-off voltage. Making the gate more negative narrows the channel: ID = IDSS (1 − VGS/VP)². Transconductance gm = ΔID/ΔVGS, and the drain resistance rd = ΔVDS/ΔID.

What result should I get in jfet drain and transfer characteristics?

IDSS = ___ mA, VP = ___ V, gm = ___ mS, rd = ___ kΩ.

What precautions should I take in jfet drain and transfer characteristics?

Never forward-bias the gate-source junction. Handle the FET by its body, not its leads.

JFET drain and transfer characteristics: lab experiment