Components / Motors and drivers / VNH2SP30 motor driver
Motor Drivers · Motors and drivers

VNH2SP30 motor driver

High-current single H-bridge with current sense.

Full H-bridgeFunction
5.5 to 16 VSupply voltage
Up to 14 A continuous (with cooling)Rating
5 VLogic level
ReviewedMade by STMPN VNH2SP30
Get this part
In short

What is the VNH2SP30 motor driver and what is it used for?

High-current single H-bridge with current sense. Makers use it for big DC motors.

How it works

An automotive full H-bridge chip with current sensing and protection.

Key specifications

Interface module specValue
FunctionFull H-bridge
Supply voltage5.5 to 16 V
RatingUp to 14 A continuous (with cooling)
Logic level5 V

Pinout

INA INBDirection inputs
PWMSpeed (up to 20 kHz)
CSCurrent sense output
EN/DIAGEnable and fault
VIN5.5 to 16 V
OUTA OUTBMotor

How to use it

INA high and INB low runs one way, the reverse runs the other way, and both low brakes. Read CS on an analog pin to measure motor current. Add cooling for high currents.

Applications

Builds that use it

Not used in a published project yet.

Alternatives

Buy at

Common questions

What is the VNH2SP30 motor driver used for?

In maker projects: big DC motors.

How does the VNH2SP30 motor driver work?

An automotive full H-bridge chip with current sensing and protection.

What voltage does the VNH2SP30 motor driver need?

5.5 to 16 V.

What can I use instead of the VNH2SP30 motor driver?

BTS7960 43 A motor driver and Cytron MD10C 10 A motor driver.