Components / Motors and drivers / Cytron MD10C 10 A motor driver

Cytron MD10C 10 A motor driver

Robust single-channel driver with PWM and DIR inputs.

FunctionFull H-bridge
Supply voltage5 to 30 V
Rating13 A continuous
Logic level3.3 or 5 V
Motor DriversReviewedMPN MD10C
In short

What is the Cytron MD10C 10 A motor driver and what is it used for?

Robust single-channel driver with PWM and DIR inputs. Makers use it for robot competitions.

How it works

A MOSFET H-bridge with a gate driver, rated 13 A continuous.

Key specifications

Interface module specValue
FunctionFull H-bridge
Supply voltage5 to 30 V
Rating13 A continuous
Logic level3.3 or 5 V

Pinout

PWMSpeed
DIRDirection
GNDSignal ground
POWER + -5 to 30 V
MOTOR A BMotor
Test buttonsRun without a controller

How to use it

PWM up to 20 kHz on PWM and set DIR for direction (sign-magnitude). Works with 3.3 V and 5 V boards. Use the test buttons to check wiring before connecting your board.

Applications

Builds that use it

Not used in a published project yet.

Alternatives

Buy at

Common questions

What is the Cytron MD10C 10 A motor driver used for?

In maker projects: robot competitions.

How does the Cytron MD10C 10 A motor driver work?

A MOSFET H-bridge with a gate driver, rated 13 A continuous.

What voltage does the Cytron MD10C 10 A motor driver need?

5 to 30 V.

What can I use instead of the Cytron MD10C 10 A motor driver?

Cytron MDD10A dual 10 A driver and BTS7960 43 A motor driver.