Screw terminal block 2-pin (5 mm)
PCB screw terminal for power and motor wires.
TypePCB screw terminal
Pitch5.0 mm
RatingAbout 10 A 300 V
Pins2 (slide together for more)
ConnectorsReviewedMPN KF301-2PUsed in 2 projects
In short
What is the Screw terminal block 2-pin (5 mm) and what is it used for?
PCB screw terminal for power and motor wires. Makers use it to power inputs on PCBs.
How it works
A screw presses a clamp plate onto the wire.
Key specifications
| Connector spec | Value |
|---|---|
| Type | PCB screw terminal |
| Pitch | 5.0 mm |
| Rating | About 10 A 300 V |
| Pins | 2 (slide together for more) |
| Used for | Power and motor wires |
Pinout
Two clamps5 mm pitch
How to use it
Use ferrules on stranded wire rather than tinning the ends with solder, which loosens over time. Slide blocks together for more ways.
Applications
Power inputs on PCBs
Builds that use it
Alternatives
- Screw terminal block 3-pin (5 mm)Three ways
- Ferrules kit (bootlace)Ferrules
Common questions
What is the Screw terminal block 2-pin (5 mm) used for?
In maker projects: power inputs on PCBs.
How does the Screw terminal block 2-pin (5 mm) work?
A screw presses a clamp plate onto the wire.
What can I use instead of the Screw terminal block 2-pin (5 mm)?
Screw terminal block 3-pin (5 mm) and Ferrules kit (bootlace).
