J-Link EDU Mini
Professional ARM debug probe for students.
FunctionJTAG/SWD debugger
Supply voltageUSB
Logic level1.2 to 5 V target
InterfacesReviewedMPN 8.08.91Used in 1 project
In short
What is the J-Link EDU Mini and what is it used for?
Professional ARM debug probe for students. Makers use it for debugging ARM chips.
How it works
A SEGGER debug probe that drives SWD and JTAG for Arm Cortex and RISC-V chips.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | JTAG/SWD debugger |
| Supply voltage | USB |
| Logic level | 1.2 to 5 V target |
Pinout
10-pin 1.27 mmCortex debug connector (VTref, SWDIO, SWCLK, SWO, RESET, GND)
How to use it
VTref must connect to the target supply, and it does not power the target. Use with SEGGER Ozone, VS Code or STM32CubeIDE. The EDU licence is for education and non-commercial use only.
Applications
Debugging ARM chips
Builds that use it
Alternatives
- ST-Link V2 programmer (clone)Cheaper STM32 programmer
- Raspberry Pi Debug ProbeLow-cost CMSIS-DAP
Common questions
What is the J-Link EDU Mini used for?
In maker projects: debugging ARM chips.
How does the J-Link EDU Mini work?
A SEGGER debug probe that drives SWD and JTAG for Arm Cortex and RISC-V chips.
What voltage does the J-Link EDU Mini need?
USB.
What can I use instead of the J-Link EDU Mini?
ST-Link V2 programmer (clone) and Raspberry Pi Debug Probe.
