Passives · Resistors
Potentiometer 10 kΩ
Provides an adjustable resistive divider.
10 kΩValue
±20% (typical)Tolerance
0.1 to 0.5 W depending on sizePower rating
Rotary, 3 pinsPackage
103 or B10K (B = linear taper)Marking
Get this part
In short
What is the Potentiometer 10 kΩ and what is it used for?
Provides an adjustable resistive divider. Makers use it to read analog voltage with a controller.
In the real world
Volume knobs and user-adjustable controls
How it works
Passive components shape current, voltage, timing and filtering behavior. Selection depends on value, tolerance, power rating and construction.
Key specifications
| Passive component spec | Value |
|---|---|
| Value | 10 kΩ |
| Tolerance | ±20% (typical) |
| Power rating | 0.1 to 0.5 W depending on size |
| Package | Rotary, 3 pins |
| Marking | 103 or B10K (B = linear taper) |
Pinout
Outer pin 1One end of the track (connect to GND)
Wiper (middle)Variable output
Outer pin 3Other end (connect to 5 V or 3.3 V)
How to use it
As a voltage divider into an analog input: ends to GND and the supply, wiper to the ADC pin.
Applications
Brightness and volume knobsSetting thresholdsAnalog input practice
Builds that use it
Guided build
PWM LED dimmer
Guided build
Knob-controlled servo
Guided build
DC motor speed and direction
Guided build
RGB colour mixer
Guided build
Temperature threshold alarm
Guided build
Serial debug console
Guided build
Stepper motor that follows a knob
Guided build
Two-wheel self-balancing robot
Showing 8 of 248
Alternatives
- LDR PhotoresistorLight-dependent instead of a knob
Common questions
What is the Potentiometer 10 kΩ used for?
In products: volume knobs and user-adjustable controls. In maker projects: read analog voltage with a controller.
How does the Potentiometer 10 kΩ work?
Passive components shape current, voltage, timing and filtering behavior. Selection depends on value, tolerance, power rating and construction.
What can I use instead of the Potentiometer 10 kΩ?
LDR Photoresistor.
