Components / Connectors and prototyping / 2.54 mm Pin Header

2.54 mm Pin Header

Common prototyping connection header family.

TypeMale pin header strip
Pitch2.54 mm (0.1 inch)
RatingAbout 3 A per pin
Pins40 per strip; snap to length
ConnectorsReviewedMPN 1 × 40 male headerUsed in 2 projects
2.54
In short

What is the 2.54 mm Pin Header and what is it used for?

Common prototyping connection header family. Makers use it for breadboard connection practice.

In the real world

Board-to-board prototyping

How it works

Physical fit alone does not prove electrical compatibility. Verify pitch, mating type, polarity and current rating.

Key specifications

Connector specValue
TypeMale pin header strip
Pitch2.54 mm (0.1 inch)
RatingAbout 3 A per pin
Pins40 per strip; snap to length
Used forSoldering modules so they fit breadboards and jumper wires

Pinout

Each pinOne connection, no polarity

How to use it

Snap off the length you need. Push the long side into a breadboard, sit the module on top and solder: the breadboard holds the pins straight.

Applications

Buy at

Common questions

What is the 2.54 mm Pin Header used for?

In products: board-to-board prototyping. In maker projects: breadboard connection practice.

How does the 2.54 mm Pin Header work?

Physical fit alone does not prove electrical compatibility. Verify pitch, mating type, polarity and current rating.