Components / Sensors / Hall effect current sensor ACS758 (50 A)

Hall effect current sensor ACS758 (50 A)

High-current Hall sensor for motors and inverters.

MeasuresAC or DC current
Range±50 A
InterfaceAnalog, 40 mV per A
Supply voltage3 to 5.5 V
SensorsReviewedMPN ACS758LCB-050BUsed in 1 project
ACS758
In short

What is the Hall effect current sensor ACS758 (50 A) and what is it used for?

High-current Hall sensor for motors and inverters. Makers use it for e-bike and solar current.

How it works

Like the ACS712, a Hall sensor measures the field from current in a copper conductor inside the package.

Key specifications

Sensor specValue
MeasuresAC or DC current
Range±50 A
InterfaceAnalog, 40 mV per A
Supply voltage3 to 5.5 V

Pinout

VCC3 to 5.5 V
GNDGround
VIOUTAnalog output, VCC/2 at 0 A
IP+ and IP−Thick current terminals

How to use it

At 5 V supply, the output moves 40 mV per amp from 2.5 V. Use thick wire and lugs on the current terminals. It is isolated, so the measured circuit stays separate.

Applications

Alternatives

Buy at

Common questions

What is the Hall effect current sensor ACS758 (50 A) used for?

In maker projects: e-bike and solar current.

How does the Hall effect current sensor ACS758 (50 A) work?

Like the ACS712, a Hall sensor measures the field from current in a copper conductor inside the package.

What voltage does the Hall effect current sensor ACS758 (50 A) need?

3 to 5.5 V.

How do I connect the Hall effect current sensor ACS758 (50 A) to an Arduino or ESP32?

Analog, 40 mV per A. Pins: VCC (3 to 5.5 V), GND (Ground), VIOUT (Analog output, VCC/2 at 0 A), IP+ and IP− (Thick current terminals).

What can I use instead of the Hall effect current sensor ACS758 (50 A)?

ACS712 current sensor module (5 A / 20 A / 30 A).