CH341A programmer
Reads and writes SPI flash and EEPROM chips.
FunctionSPI flash / I2C EEPROM programmer
Supply voltageUSB
Logic levelCheck: many boards put 5 V on data pins
InterfacesReviewedMPN CH341AUsed in 1 project
In short
What is the CH341A programmer and what is it used for?
Reads and writes SPI flash and EEPROM chips. Makers use it for BIOS and flash recovery.
How it works
A CH341A USB chip that bit-bangs SPI and I2C to memory chips.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | SPI flash / I2C EEPROM programmer |
| Supply voltage | USB |
| Logic level | Check: many boards put 5 V on data pins |
Pinout
ZIF socket24-series and 25-series chips
SOIC-8 clipIn-circuit flash
Pin 1Match the dot
How to use it
Many black boards put 5 V on the data lines even for 3.3 V chips, so use a 1.8 V or 3.3 V adapter or fix the board first. Read with flashrom or AsProgrammer, save a backup before writing.
Applications
BIOS and flash recovery
Builds that use it
Alternatives
- USBasp AVR programmerFor AVR microcontrollers
Common questions
What is the CH341A programmer used for?
In maker projects: BIOS and flash recovery.
How does the CH341A programmer work?
A CH341A USB chip that bit-bangs SPI and I2C to memory chips.
What voltage does the CH341A programmer need?
USB.
What can I use instead of the CH341A programmer?
USBasp AVR programmer.
