BC557 PNP transistor
The PNP partner of the BC547.
TypePNP bipolar
Max voltage45 V
Max current100 mA
Key figurehFE about 200 to 450
SemiconductorsReviewedMPN BC557BUsed in 2 projects
In short
What is the BC557 PNP transistor and what is it used for?
The PNP partner of the BC547. Makers use it for high-side switching, push-pull pairs.
How it works
The PNP mirror of the BC547: current flows out of the base to turn it on.
Key specifications
| Diode or transistor spec | Value |
|---|---|
| Type | PNP bipolar |
| Max voltage | 45 V |
| Max current | 100 mA |
| Key figure | hFE about 200 to 450 |
| Package | TO-92 |
| Pin order | Collector, base, emitter (flat face towards you) |
Pinout
CCollector (left)
BBase (middle)
EEmitter (right)
How to use it
Use as a high-side switch: emitter to the positive supply, load from collector to ground, and pull the base LOW through a resistor to turn on. The base must go up to the emitter voltage to turn off, so a 3.3 V pin cannot switch a 5 V high side directly.
Applications
High-side switchingpush-pull pairs
Builds that use it
Alternatives
- BC327 PNP transistor (800 mA)Up to 800 mA
- IRF9540N P-channel MOSFETP-channel MOSFET for heavier loads
Common questions
What is the BC557 PNP transistor used for?
In maker projects: high-side switching, push-pull pairs.
How does the BC557 PNP transistor work?
The PNP mirror of the BC547: current flows out of the base to turn it on.
What can I use instead of the BC557 PNP transistor?
BC327 PNP transistor (800 mA) and IRF9540N P-channel MOSFET.
