Components / Boards / Arduino Nano ESP32

Arduino Nano ESP32

Nano-shaped ESP32-S3 board that works with the Arduino IDE and MicroPython.

MicrocontrollerESP32-S3 dual-core 240 MHz
Flash16 MB
RAM512 KB + 8 MB PSRAM
Logic level3.3 V
Development BoardsReviewedMPN ABX00083Used in 1 project
ESP32
In short

What is the Arduino Nano ESP32 and what is it used for?

Nano-shaped ESP32-S3 board that works with the Arduino IDE and MicroPython. Makers use it for wi-Fi projects in the Nano form.

How it works

A u-blox NORA-W106 module with an ESP32-S3 dual core, Wi-Fi and Bluetooth LE in the Nano form factor.

Key specifications

Development board specValue
MicrocontrollerESP32-S3 dual-core 240 MHz
Flash16 MB
RAM512 KB + 8 MB PSRAM
Logic level3.3 V
WirelessWi-Fi, Bluetooth LE

Pinout

VIN6 to 21 V
3V33.3 V out
A4 A5I2C
D11 D12 D13SPI
D0 D1Serial0
B0 B1Boot pins
LED_RED LED_GREEN LED_BLUERGB LED

How to use it

Install Arduino ESP32 Boards. Pin names follow Nano labels (D2, A0) by default, or switch to GPIO numbers in the Tools menu. Logic is 3.3 V. If it stops showing up, short B1 to GND and tap reset to enter the bootloader.

Applications

Alternatives

Buy at

Common questions

What is the Arduino Nano ESP32 used for?

In maker projects: wi-Fi projects in the Nano form.

How does the Arduino Nano ESP32 work?

A u-blox NORA-W106 module with an ESP32-S3 dual core, Wi-Fi and Bluetooth LE in the Nano form factor.

What can I use instead of the Arduino Nano ESP32?

Seeed XIAO ESP32S3 and Arduino Nano 33 IoT.