3.5 inch TFT shield for Arduino Uno (ILI9486)
Plug-on colour touch screen for the Uno and Mega with an 8-bit parallel bus.
What is the 3.5 inch TFT shield for Arduino Uno (ILI9486) and what is it used for?
Plug-on colour touch screen for the Uno and Mega with an 8-bit parallel bus. Makers use it for touch menus on an Uno or Mega.
A 320 × 480 TFT with a parallel-bus controller and a resistive touch film.
Key specifications
| Display spec | Value |
|---|---|
| Type | Colour TFT with resistive touch |
| Size | 3.5 inch |
| Resolution | 320 × 480 |
| Driver IC | ILI9486 or ILI9488 (varies) |
| Interface | 8-bit parallel |
| Supply voltage | 5 V via the shield |
Pinout
How to use it
Use the MCUFRIEND_kbv library, which detects the controller. It covers almost every Uno pin and needs a lot of RAM, so a Mega is a better host.
Applications
Builds that use it
Alternatives
- 3.5 inch TFT SPI (ILI9488)SPI version that leaves pins free
- Nextion 3.5 inch HMI displayDoes the drawing itself over serial
Common questions
What is the 3.5 inch TFT shield for Arduino Uno (ILI9486) used for?
In maker projects: touch menus on an Uno or Mega.
How does the 3.5 inch TFT shield for Arduino Uno (ILI9486) work?
A 320 × 480 TFT with a parallel-bus controller and a resistive touch film.
What voltage does the 3.5 inch TFT shield for Arduino Uno (ILI9486) need?
5 V via the shield.
How do I connect the 3.5 inch TFT shield for Arduino Uno (ILI9486) to an Arduino or ESP32?
8-bit parallel. Pins: D2 to D9 (8-bit data bus), A0 to A4 (RD WR RS CS RST control), D10 to D13 (SD card), Touch (Shares A1 A2 D6 D7).
What can I use instead of the 3.5 inch TFT shield for Arduino Uno (ILI9486)?
3.5 inch TFT SPI (ILI9488) and Nextion 3.5 inch HMI display.
