Idea
In short
How do you build a black Pill encoder menu?
A Black Pill drives a 1.3 inch SH1106 OLED with a small menu moved by a rotary encoder, with a push to choose and a few example screens. You need STM32 Black Pill (STM32F411CEU6), 1.3 inch OLED (SH1106, I2C), Rotary encoder module (KY-040) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 170 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a menu system for a small project.
Parts list
- Development Boards
- Displays
- Sensors
- Prototyping
How to build it
- Wire the display on I2C
- Read the encoder
- Draw a list of items
- Move the highlight
- Run an action on push
Common questions
What parts do I need for the black Pill encoder menu?
STM32 Black Pill (STM32F411CEU6), 1.3 inch OLED (SH1106, I2C), Rotary encoder module (KY-040) and Breadboard 830 Tie Points.
How long does the black Pill encoder menu take to build?
About 170 minutes for a intermediate maker.
