Tools / Approximate Junction Temperature

How to work out junction temperature

Every watt a part dissipates raises its inside temperature. The thermal resistance says by how much.

Tj ≈ Tamb + P × θJA

Inputs

°C
W
°C/W

Results update as you type. Prefixes work: 4.7k, 100u, 10n.

Result
Junction temperature (°C, approx.)
49
Temperature rise (°C)
24
What this leaves out
  • Steady-state θJA is highly board/environment-dependent. Not a thermal safety certification.
Step by step

The working with your numbers

  1. Temperature riseΔT = P × θJA = 0.4 W × 60 °C/W = 24 °C
  2. Junction temperatureTj = Tamb + ΔT = 25 + 24 = 49 °C
See it

Junction temperature against power

0 °C50 °C100 °C0 W500 mW1 W1.5 WPower49 °C
Tj125 °C limitJunction temperature against power. Each watt adds 60 °C. Keep the line under the part's maximum, often 125 °C.

Does the answer make sense?

  • OK: 49 °C is comfortably under a typical 125 °C limit.
  • OK: Indian summers can reach 45 °C inside an enclosure. At 45 °C ambient Tj would be 69 °C.
  • OK: The most this part can dissipate at 25 °C for a 125 °C limit is (125 − 25) ÷ 60 = 1.67 W.

Common mistakes

  • Using the lab's 25 °C ambient. Inside a box in summer it can be 20 °C or more higher.
  • Taking θJA as fixed. It depends on copper area on the PCB; datasheet values assume a test board.
  • Touching the case and judging by feel. The junction is hotter than the case.

Learn it, try it, build it

Calculated, not measured. Check the exact part datasheet and your real circuit before powering anything.

Common questions

How do you calculate junction temperature?

Tj = ambient + power × θJA. A regulator dissipating 0.4 W with θJA = 60 °C/W in a 25 °C room runs at 25 + 24 = 49 °C.

When do I need a heatsink?

When the worked-out junction temperature gets close to the datasheet's maximum (often 125 °C or 150 °C) at your hottest ambient. A heatsink lowers the effective thermal resistance.