Tools / Device Energy Estimate

How to work out energy use in watt-hours

Power is how fast energy is used; multiply by time to get energy. Electricity bills count kilowatt-hours, called units.

Energy (Wh) = power (W) × time (h)

Inputs

W
h

Results update as you type. Prefixes work: 4.7k, 100u, 10n.

Result
Energy (Wh)
20
Energy (kWh)
0.02
What this leaves out
  • Assumes constant average draw; not a battery safety or utility-billing estimate.
Step by step

The working with your numbers

  1. Energy per dayE = P × t = 2.5 W × 8 h = 20 Wh
  2. Change to kilowatt-hours20 Wh ÷ 1000 = 0.02 kWh (units)
  3. Per month (30 days)0.02 × 30 = 0.6 kWh
  4. Per year0.02 × 365 = 7.3 kWh

Does the answer make sense?

  • OK: Multiply the kWh by your tariff in rupees per unit (it is on your bill) to get the cost.
  • OK: A device that sits on standby still uses energy. 2.5 W left on all day is 0.06 kWh a day.

Common mistakes

  • Mixing watts and watt-hours. Watts are a rate; watt-hours are an amount.
  • Using the adapter's rated power. Most devices draw less than the rating; measure with a plug-in meter for a real figure.
  • Forgetting to divide by 1000 to get the units on the bill.

Learn it, try it, build it

Calculated, not measured. Check the exact part datasheet and your real circuit before powering anything.

Just need the number? Use the device energy estimate calculator on Geekobot.

Common questions

How do you work out energy use?

Multiply power in watts by hours of use to get watt-hours, then divide by 1000 for kilowatt-hours. A 2.5 W board running 8 hours uses 20 Wh, or 0.02 kWh, a day.

What is a unit of electricity?

One unit on an Indian electricity bill is one kilowatt-hour: 1,000 W for one hour, or 100 W for ten hours.