Projects / Ideas / Magic wand gesture recogniser

Magic wand gesture recogniser

IntermediateEdge AIIdeaReviewed
In short

How do you build a magic wand gesture recogniser?

Draw a circle, a zig-zag or a flick in the air with a wand and a tiny model on the board recognises it. You need Arduino Nano 33 BLE Sense Rev2 and Li-Po battery 3.7 V 500 mAh.

Level
Intermediate
Time
About 240 min
Parts
2
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Collect IMU data, train a model and deploy it.

How to build it

  1. Record each gesture 40 times with the built-in IMU
  2. Train a classifier
  3. Quantise it to 8-bit
  4. Run it on the board
  5. Send the gesture over BLE to control lights

Related projects

Common questions

What parts do I need for the magic wand gesture recogniser?

Arduino Nano 33 BLE Sense Rev2 and Li-Po battery 3.7 V 500 mAh.

How long does the magic wand gesture recogniser take to build?

About 240 minutes for a intermediate maker.