Idea
In short
How do you build a gesture detector on Nano 33 BLE Sense?
A small model recognises a few hand movements from the onboard IMU and prints the result. You need Arduino Nano 33 BLE Sense Rev2 and USB A to micro-USB cable (data).
- Level
- Advanced
- Time
- About 300 min
- Parts
- 2
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Train a gesture classifier.
Parts list
- Development Boards
- Cables & Wires
How to build it
- Collect IMU samples for each gesture
- Train a small model online
- Export it
- Run it on the board
- Check accuracy on new samples
Common questions
What parts do I need for the gesture detector on Nano 33 BLE Sense?
Arduino Nano 33 BLE Sense Rev2 and USB A to micro-USB cable (data).
How long does the gesture detector on Nano 33 BLE Sense take to build?
About 300 minutes for a advanced maker.
