Idea
In short
How do you build a line follower with a TB6612?
Two reflective sensors steer a small two-wheel robot along a black line. You need Arduino Nano, TB6612FNG Motor Driver, TCRT5000 IR reflective sensor module × 2, N20 gear motor with encoder × 2, 9 V battery and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Follow a line with two sensors.
Parts list
- Development Boards
- Motor Drivers
- Sensors
- Motors & Actuators
- Batteries
- Prototyping
How to build it
- Test the sensors on the line
- Drive both motors
- Steer by sensor state
- Tune the speed
- Add a stop mark
Common questions
What parts do I need for the line follower with a TB6612?
Arduino Nano, TB6612FNG Motor Driver, TCRT5000 IR reflective sensor module × 2, N20 gear motor with encoder × 2, 9 V battery and Breadboard 830 Tie Points.
How long does the line follower with a TB6612 take to build?
About 270 minutes for a intermediate maker.
