Idea
In short
How do you build a solar bottle heating race?
Two bottles of water, one painted black and one clear, sit in the sun with a waterproof probe in each, and the screen shows which heats faster and by how much. A classic science test of how dark surfaces absorb sunlight. Take care with hot water and strong sun. You need Arduino Nano, DS18B20 waterproof probe × 2, Resistor 4.7 kΩ, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Beginner
- Time
- About 90 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare how fast a black and a clear bottle warm up.
Parts list
- Development Boards
- Sensors
- Passives
- Displays
- Prototyping
- Prototyping
How to build it
- Put one probe in each bottle through a cap
- Share one data wire with a pull-up resistor
- Read both every 10 seconds
- Show both temperatures and the gap
- Log the readings and plot them
Common questions
What parts do I need for the solar bottle heating race?
Arduino Nano, DS18B20 waterproof probe × 2, Resistor 4.7 kΩ, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the solar bottle heating race take to build?
About 90 minutes for a beginner maker.
