Projects / Ideas / Eight-button input with a resistor network

Eight-button input with a resistor network

BeginnerLearningIdeaReviewed
In short

How do you build an eight-button input with a resistor network?

A single resistor network pulls eight button lines high, giving a tidy input panel with few parts. You need Arduino Nano, Resistor network 10 kΩ (9-pin SIP), Tactile push button 6 mm × 8 and Breadboard 830 Tie Points.

Level
Beginner
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use a SIP network as pull-ups.

How to build it

  1. Find the common pin
  2. Wire the network
  3. Wire eight buttons
  4. Read them as one byte
  5. Print the pattern

Related projects

Common questions

What parts do I need for the eight-button input with a resistor network?

Arduino Nano, Resistor network 10 kΩ (9-pin SIP), Tactile push button 6 mm × 8 and Breadboard 830 Tie Points.

How long does the eight-button input with a resistor network take to build?

About 120 minutes for a beginner maker.